dgls

Learning autodesk revit architecture 2016 free download. Revit Architecture Book Free Download Pdf

Looking for:

Project Origin – Learning Autodesk Revit Architecture [Video].

Click here to Download

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Anyone involved in the world of radio-controlled vehicles understands the amount of patience, determination, creativity, persistence, perseverance, problem solving, camaraderie—and of course, fun—that is associated with building, driving and repairin.

From the east, though, the view expands with an additional floor below; from the inside, it expands furthermore. As much as teaching has brought her tremendous joy, she admitted it was a career she was never interested in. Instead, it was forced upon her due to the financial difficulties her.

Publisher does not warrant or guarantee any of the products described in the text or perform any independent analysis in connection with any of the product information contained in the text. Publisher does not assume, and expressly disclaims, any obligation to obtain and include information other than that provided to it by the manufacturer. The reader is expressly warned to consider and adopt all safety precautions that might be indicated by the activities herein and to avoid all potential hazards.

By following the instructions contained herein, the reader willingly assumes all risks in connection with such instructions. The publisher makes no representation or warranties of any kind, including but not limited to, the warranties of fitness for particular purpose or merchantability, nor are any such representations implied with respect to the material set forth herein, and the publisher takes no responsibility with respect to such material. All rights reserved.

No part of this publication may be reproduced or distributed in any form or by any means, or stored in the database or retrieval system without the prior permission of CADCIM Technologies. The main features of this program are:. This team has authored several textbooks that are rated one of the best in their categories and are used in various colleges, universities, and training centers in North America, Europe, and in other parts of the world.

CADCIM Technologies with its cost effective and time saving initiative strives to deliver the training in the comfort of your home or work place, thereby relieving you from the hassles of traveling to training centers. Pro, Oracle Primavera P6. We also provide Live Virtual Online Training on various software packages. For more information, write us at sales cadcim. This software helps architects and designers to develop higher-quality, more accurate architectural designs. The author has adopted the project-based approach and the learn-by-doing theme throughout the textbook.

The author has used real-world building designs and architectural examples as projects in this textbook so that the users can correlate them to the real-time designs. Additional information related to various topics is provided to the users in the form of tips and notes.

The first page of every chapter summarizes the topics that will be covered in that chapter. Every chapters ends with Self-Evaluation test so that the users can assess their knowledge of the chapter. The text in this book is heavily illustrated with around line diagrams and screen capture images that support the command sections and tutorials.

Example: The Options dialog box, the Wall drop-down of Build panel in the Architecture tab, the Name edit box of the Name dialog box, the Chain check box in the Options Bar , and so on.

Example: Enter Brick Wall in the Name edit box. Wall: Architectural tool, Window tool, Railing tool. Load Family tool, Materials tool, Project Units tool. The item in a dialog box that has a 3d shape like button is also termed as button. For example, OK button, Cancel button, Apply button, and so on. If an item in a ribbon is used to exit a tool or a mode then that item is also termed as a button.

In this textbook, different terms are used to indicate various components of a dialog box. Refer to Figure 3 for the terminologies used for referring to the components of a dialog box. A drop-down is the one in which a set of common tools are grouped together for performing an action.

You can identify a drop-down with a down arrow on it. The drop-downs are given a name based on the tools grouped in them. For example, Wall drop-down, Component drop-down, Region drop-down, and so on, refer to Figure 4. A drop-down list is the one in which a set of options are grouped together. You can set a parameter using an option from this drop-down list. You can identify a drop-down list with a down arrow on it. For example, Type Selector drop-down list, Units drop-down list, and so on; refer to Figure 5.

Figure 5 Selecting an option from the Type Selector drop-down list. Options are the items that are available in shortcut menus, drop-down lists, dialog boxes, drop-down lists, and so on. For example, choose the Zoom In Region option from the shortcut menu displayed on right-clicking in the drawing area; refer to Figure 6. It has been our constant endeavor to provide you the besttextbooks and services at affordable price.

In this endeavor, we have come out with a free Companion website that will facilitate the process of teaching and learning of Autodesk Revit Architecture If you purchase this textbook, you will get access to the files on the Companion website. You can get online technical support by contacting techsupport cadcim. Solutions to all review questions and exercises in the textbook are provided in this guide to help the faculty members test the skills of the students.

The contents of the book are arranged in PowerPoint slides that can be used by the faculty for their lectures. If you face any problem in accessing these files, please contact the publisher at sales cadcim. To get such updates, follow us on Facebook www. You can also subscribe to our YouTube channel www. Welcome to the realm of Autodesk Revit Architecture, a powerful building modeler that has changed the outlook of the building industry about computer aided designs. Autodesk Revit Architecture is a design and documentation platform that enables you to use a single, integrated building information model to conceptualize, design, and finally document a project.

Its integrated parametric modeling technology is used to create the information model of a project, and to collect and coordinate information across all its representations. In Autodesk Revit Architecture, drawing sheets, 2D views, 3D views, and schedules are a direct representation of the same building information model.

Using its parametric change engine, you can modify a design at any stage of a project. The change in the project is automatically made and represented in all its views, resulting in the development of better designs, along with an improved coordination.

The use of Autodesk Revit Architecture provides a competitive advantage and a higher profitability to architects and building industry professionals.

The history of computer aided design and documentation dates back to the early s when architects began using this technology for documenting their projects. Realizing its advantages, information sharing capabilities were developed, especially to share data with other consultants. This led to the development of object-based CAD systems in the early s.

Before the development of these systems, objects such as walls, doors, windows were stored as a non-graphical data with the assigned graphics. These systems arranged the information logically, but were unable to optimize its usage in a building project.

Realizing the advantages of the solid modeling tools, the mechanical and manufacturing industry professionals began using the information modeling CAD technology. This technology enabled them to extract data based on the relationship between model elements.

In , a group of mechanical CAD technologists began working on a new software for the building industry. The Building Information Modeling BIM provided an alternative approach to building design, construction, and management. This approach, however, required a suitable technology to implement and reap its benefits. In such a situation, the use of parametric technology with the Building Information Modeling approach was envisaged as an ideal combination. They developed a software that was suitable for creating building projects.

This led to the development of a software that later came to be known as Autodesk Revit Building, and has now been changed to Autodesk Revit Architecture. Autodesk Revit Architecture is a building design and documentation platform, in which a digital building model is created using the parametric elements such as walls, doors, windows, and so on. All the building elements have inherent relationship with one another, which can be tracked, managed, and maintained by the computer.

Autodesk Revit Architecture enables you to envisage and develop a building model with actual 3D parametric building elements. It provides a new approach to the architectural thought and the implementation process. In a way, it replicates the way architects conceive a building.

However, in Autodesk Revit Architecture, you can create a building model using 3D elements such as walls, floors, doors, and windows, as shown in Figure Figure Autodesk Revit Architecture project created using parametric building model.

Using these 3D elements, you can visualize the architectural or interior project with respect to its scale, volume, and proportions. This enables you to study design alternatives and develop superior quality design solutions. Autodesk Revit Architecture automates routine drafting and coordination tasks and assists in reducing errors in documentation. This, in turn, saves time, improves the speed of documentation, and lowers the cost for users. A project in Autodesk Revit Architecture is created using the in-built parametric building elements.

The term parametric refers to the relationship parameters between various building elements. Some relationships are made by Autodesk Revit Architecture itself, and others by the user.

For example, doors, which have an inherent parametric relationship with walls cannot be created without first creating a host wall. A door always moves with the host wall. Similarly, floors too are parametrically linked to walls. When you move walls, the floor extents are also modified automatically. Each building element has in-built bidirectional associativity with many other elements in the project. A building information model is created using different interdependent parametric building elements such as walls, floors, roof, ceiling, stairs, ramps, curtain walls, and so on.

As they are bidirectionally associated elements, any change made in one element is automatically adopted by others. The integrated building information model thus created contains all the data for a project. You can then create project presentation views such as plans, sections, elevations, and so on for documentation. This capability is, therefore, the underlying concept in Autodesk Revit Architecture. As changes are made immediately and automatically, it saves the time and effort in coordinating them in all other associated views which for most projects is an inevitable part of the design process.

Autodesk Revit Architecture also provides a variety of in-built parametric element libraries that can be selected and used to create a building model. It also provides you with the flexibility of modifying properties of these elements or create your own parametric elements based on the project requirement. Before using Autodesk Revit Architecture, it is important to understand the basic terms used for creating a building model.

Various terms in Autodesk Revit Architecture such as project, level, category, family, type, and instance are described next. A project in Autodesk Revit Architecture is similar to an actual architectural or interior project. In an actual project, the entire documentation such as drawings, 3D views, specifications, schedules, cost estimates, and so on are inherently linked and read together.

Similarly, in Autodesk Revit Architecture, a project not only includes the digital 3D building model but also its parametrically associated documentation. Thus, all the components such as the building model, its standard views, architectural drawings, and schedules combine together to form a complete project. A project file contains all the project information such as building elements used in a project, drawing sheets, schedules, cost estimates, 3D views, renderings, walkthroughs, and so on.

A project file also stores various settings such as environment, lighting, and so on. As data is stored in the same file, it becomes easier for Autodesk Revit Architecture to coordinate the entire database. In Autodesk Revit Architecture, a building model is divided into different levels. These levels may be understood as infinite horizontal planes that act as hosts for different elements such as roof, floor, ceiling, and so on.

The defined levels in a building model can in most cases relate to different floor levels, or stories of the building project. Each element that you create belongs to a particular level. Apart from building elements, an Autodesk Revit Architecture project also contains other associated elements such as annotations, imported files, links, and so on.

These elements have been divided into following categories:. Model Category : Consists of various building elements used in creating a building.

Annotation Category : Consists of annotations such as dimensions, text notes, tags, symbols,. Datum Category : Consists of datums such as levels, grids, reference planes, and so on. View Category : Consists of interactive project views such as floor plans, ceiling plans, elevations, sections, 3D views, renderings, and walkthroughs. In addition to these four categories, other categories such as Imported , Workset , Filter , and Revit Categories can also exist if the project has imported files, enabled worksets, or linked Autodesk Revit Architecture projects, respectively.

Another powerful concept in Autodesk Revit Architecture is family. A family is described as a set of elements of the same category that can be grouped together based on certain common parameters or characteristics. Elements of the same family may have different properties, but they all have common characteristics. For example, Double Hung is a single window family, but it contains different sizes of double hung windows.

Family files have a. You can load additional building component families from the libraries provided in Autodesk Revit Architecture package. Families are further divided into certain types. Type or family type, as it is called, is a specific size or style of a family. For example, Double Hung : 36 x 48 is a window type. All uses of the same family type in a project have same properties. Family and family types can also be used to create new families using the Family Editor.

Instances are the actual usage of model elements in a building model or annotations in a drawing sheet. A family type created in a new location is identified as an instance of the family type.

All instances of the same family type have same properties. Therefore, when you modify the properties of a family type, the properties of all its instances also get modified.

The family categorization of Revit elements is given below:. The hierarchy of building elements in Autodesk Revit Architecture plays an important role in providing the flexibility and ease of managing a change in the building model. Figure shows the hierarchy of categories and families in a typical Autodesk Revit Architecture project.

The following is another example of the terms described in this section. Another classification of categories of elements followed in Autodesk Revit Architecture is based on their usage. Autodesk Revit Architecture uses five classes of elements: host, component, annotation, view, and datum. Hosts are the element categories that form the basic structure of a building model and include model elements such as walls, floor, roof, and ceiling. Components are the elements that are added to host elements or act as stand-alone elements such as doors, windows, and furniture.

Annotations are the 2D, view-specific elements that add content to the project documentation such as dimensions, tags, text notes, and so on. Views represent various orientations of a building model such as plans, elevations, sections, 3D views, and so on. Datum refers to the reference elements that assist you in creating a building model, which include grids, levels, reference planes, and so on.

There is no specific methodology available for creating a building model in Autodesk Revit Architecture. It provides you with the flexibility of generating building geometry based on the project requirement, design complexity, and other factors. However, the following steps describe a general procedure that may be followed for creating an architectural building model using the in-built parametric elements provided in Autodesk Revit Architecture.

The first step is to create the exterior walls of a building at the predefined lowest level level 1. Next, create interior walls at that level and add components to the building model. Then, define the upper levels based on the story height of the building. You can also link the control height of the walls to the levels and extend the exterior walls to their full height. Next, create floors and roof using the defined levels.

Add the site topography to the building model and then add site components to complete the building project. You can then create drawing sheets with the desired views for its presentation. Autodesk Revit Architecture also provides tools to create rendered 3D views and walkthroughs.

Figure shows an example of a building section with various building elements and annotations. Autodesk Revit Architecture enables you to control the display and graphic representation of a single element or the element category of various elements in project views by using the visibility and graphics overrides tools.

You can select a model category and modify its linetype and detail level. This can also be done for various annotation category elements and imported files. These settings can be done for each project view based on its desired representation. You can also hide an element or an element category in a view using the Hide in View and Isolate tools.

The scale is another important concept in an Autodesk Revit Architecture project. As you set a scale, Autodesk Revit Architecture automatically sets the detail level appropriate for it. You can also set the detail level manually for each project view. Each detail level has an associated linetype and the detail lines associated with it. The details of annotations such as dimensions, tags, and so on are also defined by the selected scale. A single integrated building information is used to create and represent a building project.

You can extract project information from a building model and create area schemes, schedule, and cost estimates, and then add them to the project presentation. Autodesk Revit Architecture also enables you to export the extracted database to the industry standard Open Database Connectivity ODBC compliant relational database tables. The use of the building information model to extract database information eliminates the error-prone method of measuring building spaces individually. After creating the building model, you can easily arrange the project views by plotting them on drawing sheets.

Drawing sheets can also be organized in a project file based on the established CAD standards followed by the firm. In this manner, the project documentation can easily be transformed from the conceptual design stage to the design development stage and finally to the construction document stage. The project view on a drawing sheet is only a graphical representation of the building information model and therefore, any modification in it is immediately made in all the associated project views, keeping the drawings set always updated.

Autodesk Revit Architecture also helps you conceptualize a building project in terms of its volume, shape, and proportions before working with the actual building elements. This is possible by using the Massing tool, which enables you to create quick 3D models of buildings and conduct volumetric and proportion study on overall masses.

It also enables you to visualize and create an unusual building geometry. The same massing model can then be converted into a building model with individual parametric building elements. It provides continuity in the generation of building model right from sketch design to its development. Autodesk Revit Architecture provides a large number of in-built family types of various model elements and annotations. Each parametric element has the associated properties that can be modified based on the project requirement.

Autodesk Revit Architecture also enables you to create the elements that are designed specifically for a particular location. The in-built family editor enables you to create new elements using family templates. This provides you with the flexibility of using in-built elements for creating your own elements. For example, using the furniture template, you can create a reception desk that is suitable for a particular location in the design.

An extensive in-built library of structural elements has been provided in Autodesk Revit Architecture. You can add structural columns, beams, walls, braces, and so on to the project. Thus, structural consultants can also incorporate their elements in the basic architectural building model and check for inconsistency, if any. In Autodesk Revit Architecture, you can work on large projects by linking different building projects together.

For a large project that consists of a number of buildings, you can create individual buildings as separate projects and then link all of them into a single base file. The database recognizes the linked projects and includes them in the project representation of the base file.

For example, while working on a large campus of an educational institution, you can create separate project files for academic building, administration area, gymnasium, cafeteria, computer centre, and so on, and then link them into the base site plan file. In this manner, large projects can be subdivided and worked upon simultaneously.

Worksets in Autodesk Revit Architecture enable the division of the building model into small editable set of elements. The worksets can be assigned to different teams working on the same project and then their work can easily be coordinated in the central file location. The effort required to coordinate, collaborate, and communicate the changes between various worksets is taken care of by computer.

Various consultants working on a project can be assigned a workset with a set of editable elements. They can then incorporate their services and modify the associated elements. For example, a high rise commercial building project can be divided into different worksets with independent teams working on exterior skin, interior walls, building core, toilet details, finishes, and so on.

The structural consultants can be assigned the exterior skin and the core workset in which they can incorporate structural elements. Similarly, the rest of the teams can work independently on different worksets. When you turn on your computer, the operating system is automatically loaded. You can start Autodesk Revit Architecture by double-clicking on the Revit Architecture icon on the desktop. Figure Starting Autodesk Revit Architecture using the taskbar.

The path for starting Autodesk Revit Architecture depends on the operating system being used. The interface screen has three sections: Projects , Families , and Resources. The options in the Projects section are used to open an existing project, a new project, and an existing template. The options in the Families section are used to open a new or an existing family. You can also invoke the Conceptual Mass environment from this section to create a conceptual mass model.

From this page, you can download various components for your project. In addition, you can choose the Help option from the Resources section. In the left of this page, the Contents and the Search tab will be displayed. On doing so, the New in Revit page will be displayed with various links. You can know about various enhancements through these links.

In the Resources section, you can choose the Essential Skills Videos option to view the videos related to basic and advance concepts in Autodesk Revit Architecture These videos and their associated information help you to learn about the complete software. Moreover, you can choose the Exchange Apps option to access various add-ons that can be used to enhance the productivity of Revit.

In this page, various links are available as add-ons which can be used in Revit applications. In the Revit Community option of the Resources section, you can access information related to various communities and their contribution in the form of articles, tutorials, and videos.

In the Projects section, choose the Open option; the Open dialog box will be displayed. Browse to the desired location in the dialog box and select the file.

Now, choose the Open button to open the file. To open a new project file, choose the New option from the Projects section. In this dialog box, you can select the desired template from the Template file drop down or you can browse the other template files, by choosing the Browse button from the Choose Template dialog box. In this dialog box, make sure that the Project radio button is selected, and then choose the OK button; a new project file will open and the interface screen will be activated.

Autodesk Revit Architecture has ribbon interface. The ribbon which contains task-based tabs and panels, streamlines the architectural workflow and optimizes the project delivery time. In Autodesk Revit Architecture, when you select an element in the drawing area, the ribbon displays a contextual tab that comprises of tools corresponding to the selected element.

The interface of Autodesk Revit Architecture is similar to the interfaces of many other Microsoft Windows based programs. Figure The Autodesk Revit Architecture user interface screen. To perform an operation, you can invoke the required tools by using any one of the following two options:.

Shortcut Keys : Some tools can also be invoked by using the keys on the keyboard. Project 1- Floor Plan: Level 1 is the default project and view. The ribbon, as shown in Figure , is an interface that is used to invoke tools. When you open a file, the ribbon is displayed at the top in the screen. It comprises of task-based tabs and panels, refer to Figure , which provide all the tools necessary for creating a project.

The tabs and panels in the ribbon can be customized according to the need of the user. This can be done by moving the panels and changing the view states of the ribbon changing the ribbon view state is discussed later in this chapter.

The ribbon has three types of buttons are available in: general button, drop-down button, and split button. These buttons can be invoked from the panels. In the ribbon, you can move a panel and place it anywhere on the screen. To do so, press and hold the left mouse button on the panel label in the ribbon, drag it to some desired place on the screen. Next, use the tools of the moved panel and place the panel back to the ribbon.

To do so, place the cursor on the moved panel and choose the Return Panels to Ribbon button from the upper right corner of this panel, as shown in Figure ; the panel will return to the ribbon. The ribbon can be displayed in three view states by selecting any of the following four options: Minimize to Tabs , Minimize to Panel Titles , Minimize to Panel Buttons , and Cycle through All.

To use these options, move the cursor and place it over the second arrow on the right of the Modify tab, refer to Figure in the ribbon; the arrow will be highlighted. Now, click on the down arrow; a flyout will be displayed, as shown in Figure In this flyout, you can choose the Minimize to Tabs option to display only the tabs in the ribbon. If you choose the Minimize to Panel Titles option, the ribbon will display the titles of the panels along with the tabs. You can choose the Minimize to Panel Buttons option to display the panels as buttons in the ribbon along with tabs.

Figure Various options in the flyout for changing the view state of the ribbon. If the view state of the ribbon is changed, place the cursor over the first arrow at the right of the Modify tab, the Show Full Ribbon tooltip will be displayed. Click on the arrow; full ribbon will be displayed. These tabs are displayed when you choose certain tools or select elements.

These tabs contain a set of tools or buttons that relate only to a particular tool or element. For example, when you invoke the Window tool, the Modify Place Window contextual tab is displayed. The Select panel contains the Modify tool. The Properties panel contains the Properties button and the Type Properties tool. The Mode panel has some necessary tools that are used to load model families or to create the model of a window in a drawing.

The other panels, apart from those discussed above, contain the tools that are contextual and are used to edit elements when they are placed in a drawing or selected from a drawing for modification. The application frame helps you manage projects in Autodesk Revit Architecture.

These are discussed next. The Application button is displayed at the top-left corner of the Revit interface. This button is used to display as well as close the Application Menu. The Application Menu contains the tools that provide access to many common file actions such as Open , Close , and Save.

Click the down arrow on the Application button to display the Application Menu , as shown in Figure The Quick Access Toolbar , as shown in Figure , contains the options to undo and redo changes, open and save a file, create a new file, and so on. You can customize the display of the Quick Access Toolbar by adding more tools and removing the unwanted tools.

You will start with a tour of the user interface, then jump into learning about column grids. From there, Brian will teach you about walls, doors and windows, including how to offset a wall, place a door, and adjust walls and columns. This video tutorial also covers topics including views, floors, roofs, ceilings, casework, and stairs. You will also learn about topography, rooms, and how to prepare and render a scene.

Brian will then teach you about detailing, modify tools, and graphics. Once you have completed this commuter based training course, you will be fully capable of creating your own Revit models using the tools and techniques available in this software program from Autodesk. Working files are included, allowing you to follow along with the author throughout the lessons. Many people think leadership is a higher calling that resides exclusively with managers who practice or ….

The countless tools and automation features included in Autodesk Inventor allow designers to create detailed models …. In this advanced Revit Architecture training course, expert author Brian Myers takes you beyond the …. In this Lumion 3D training course, expert author Brian Myers will teach you essential skills needed ….

 
 

 

Learning autodesk revit architecture 2016 free download.Autodesk revit architecture 2016 x64

 

MS Word ‘s key Windows Mac. Windows Users’ choice Revit architecture download Revit architecture download Most people looking for Revit architecture downloaded: Autodesk Revit Autodesk Revit Architecture Autodesk Revit LT Autodesk Revit Architecture. Worksharing Monitor Modeling BIM. Revit Architecture helps you Revit To Lumion The program Autodesk Revit LT It allows you to view the virtual models coming from CAD systems like Autodesk Navisworks Freedom is a program that allows you to combine design data created in applications such as AutoCAD At the same time, kindly ensure that your anti-virus, firewall, and UAC are temporarily disabled while you download and install the program.

Had the same problem with installing a trial version of Revit LT [Windows 8. Revit Architecture Forum. Share your knowledge, ask questions, and explore popular Revit Architecture topics. Turn on suggestions. Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type. Showing results for. Autodesk Revit Architecture x64 Free Download. It is completely stand-alone installer installation of Autodesk Revit Architecture Autodesk Revit Architecture x64 is an impressive application that can be used for designing 2D structural and 3D model to build with circuit boards, plumbing and ventilation in mind.

Building construction includes a lot of planning as well as design to achieve the best possible results. You can also download Autodesk Revit Architecture for free download.